 |
|
|
   |
||
 |
||
|
MiGMan's Saitek Guide Cleaning the pots Q: How do I clean my pots? A: Sometimes the electronic "noise" from a pot is due to foreign material (dirt) dirt being present between the moving surfaces. If this is the case then cleaning with a product like "CRC Switch Cleaner Lubricant" may remove the offending matter. This product or similar is available from electronic supply shops. Open your joystick and liberally flood the offending pot with the cleaning fluid, taking care not to get any on the surrounding circuit boards. The tools you will need are shown at right, an Allen Key and a Phillips Head Screwdriver. NOTE: This advice is only good for analog type joysticks. The newer devices use optical sensors and don't need cleaning., |
Email MiGMan with your experiences or any information related to this sim. |
|
|
||
|
The contents of this website are copyright © 1998 - 2007 by MiGMan |
||
|
The contents of this website are copyright © 1998 - 2007 by MiGMan |
||