MiGMan
Home

Jetfighter III by Mission Studios Jetfighter III by Mission Studios
Exhibit: Jetfighter III

Air to Ground

MISSION PROFILES
The standard ground attack profile is known as a : HI - LOW - HI i.e. a High level ingress, a low level approach to target and a high level return to base.
LOW LEVEL FLIGHT
Set Pitch Ladder to 5 degrees L
Set Altimeter to ABOVE GROUND LEVEL Shift A
Fly BELOW 500 FEET
Warning: Do not exceed 5 degrees pitch down when manoeuvering at low altitude
AGM-65 MAVERICK
Radar DISPLAYED Alt R
AGM-65 SELECT Backspace
Select pre-programmed targets T
Wpn release when 'IN RNG' is displayed
Egress
A/C IS FREE TO MANOUEVER AFTER WEAPON RELEASE
JINK
FLARES F
CHAFF C
CCIP BOMBING
Select MK82 Backspace
Altimeter to ABOVE GROUND LEVEL Alt A
Head TOWARDS TARGETS
Altitude 1,500 ft
RELEASE BOMBS AS PIPPER PASSES OVER TARGET
Pipper on the target
Pipper on the target
JINK
FLARES F
CHAFF C
TARGETS OF OPPORTUNITY: AGM-65 Maverick
Radar DISPLAYED Alt R
AGM-65 SELECT Backspace
Enable Targeting system Shift D
MANOEUVER TDC OVER TARGET
DESIGNATE TARGET D
The Target Designation box is handy when the target is beyond visual range
The Target Designation box is handy when the target is beyond visual range.
Release weapon when TDC flashes
JINK
FLARES F
CHAFF C
NOTE: The target designator can be very useful for marking target locations. For example, on a low level sweep in bad weather and rugged terrain, marking a location as you fly past makes it easy to find your way back using the HUD range readout and the tactical view (F9).