MiGMan's Flight Sim Museum < www.migman.com >
 TFX | by Digital Image Design

TFX: by Digital Image Design

HUD (Heads Up Display) from TXX, 1993

BASIC CONTROLS

ENGINES
All three aircraft flown in TFX are powered by two engines.
Press the + key to increase the engines' thrust.
Press the - key to decrease the engines' thrust.
Press the [ key to ignite or shut down Engine 1.
Press the ] key to ignite or shut down Engine 2.

AFTERBURNERS
Press the + key on the numeric keypad to increase the
afterburner by one stage.
Press the - key on the numeric keypad to decrease the
afterburner by one stage.
Press the / key on the numeric keypad to turn off the
afterburner.

AUTO PILOT
Once the auto pilot is engaged, there are four modes of operation
available. For further details see THE AUTO PILOT on page 25.

Press the A key to toggle the auto pilot ON or OFF.
Press the 7 key for auto pilot mode 1.
Press the 8 key for auto pilot mode 2.
Press the 9 key for auto pilot mode 3.
Press the 0 key for auto pilot mode 4.

AUTO LAND
Press and hold an Alt key then press the L key to activate the
computer-controlled landing.

LANDING SYSTEMS

BRAKES
Press the W key to toggle the wheel brakes ON or OFF.
Press the B key to toggle the air brake ON or OFF.
Press and hold an Alt key then press the B key to deploy the
brake chute.
Press and hold the left-hand shift key then press the B key to
release the chute.

NAVIGATION AND DETECTION SYSTEMS

TARGET LOCK
Your aircraft can track up to 10 targets at once.
Press the C key to toggle the lock between targets.
Press the X key to break your current lock.

THE MAP
A complete overview of your surroundings. Different colored dots
represent enemy and friendly installations and airborne craft.
For further details, see THE MAP on page 14.

Press the M key to toggle the map ON or OFF.

THE MULTI-FUNCTION DISPLAYS
Each aircraft has three MFDs from which a wealth of information
is easily accessed. For further details, see MULTI-FUNCTION
DISPLAYS on page 14.

Press the 1 key to cycle through MFD1.
Press the 2 key to cycle through MFD2.
Press the 3 key to cycle through MFD3.
Press the L key to display the last displayed message.

INFRARED NIGHT SIGHT
Yes, you too can see in the dark without the aid of carrots.
Press and hold the left-hand shift key then press the N key to
toggle the infrared night sight ON or OFF.